Meets the requirements of the current DIN EN 12195-2Lashing strap for securing passenger cars and light commercial vehicles during vehicle transport based on VDI 2700 Sheet 8.1.Three-part with two finger profile hooks and stop strap. Perm.: 1,500 daN STF: 330 daN, ratchet with compact design and excellent security values Incl. lifting strap of 0.30 m Elongation of the webbing < 4% Webbing Width: 35mm Fixed end: 0.15 m, loose end: 2.30 m
Based on the current DIN EN 12195-2Lashing strap for securing passenger cars and light commercial vehicles during vehicle transport. LC: 1,500 daN STF: 330 daN, ratchet with a compact design and excellent security values with webbing slider webbing with elongation < 4%, also available with elongation < 2.5% and < 1.5% (on request) Webbing width: 35mm or 50mm Total length: 2.5m
Meets the requirements of the current DIN EN 12195-2 LC in direct tension: 500 daN, in the strapping: 1,000 daN 50mm webbing width 2 pcs. with side wall claw Highly stretched polyester fabric, abrasion and abrasion resistant Fixed end: 0.25 m, loose end: 4.25 m, 4.50 m in total
Meets the requirements of the current DIN EN 12195-3Lashing chain for securing containers (depositables) with oval suspension link, ratchet tensioner and safety load hook. Available in two lengths and different nominal thicknesses. Permitted Tensile force of 4,000 daN and 6,300 daN Chain nominal thickness: 8 and 10 mm With safety load hook Dimensions oval eyelet: 110 x 60 mm Material thickness: 16 mm
Meets the requirements of the current DIN EN 12195-2 2 pcs. with profile hook LC in the strapping: 1,000 daN LC in direct tension: 500 daN STF: 200 daN Webbing Width: 25mm
Meets the requirements of the current DIN EN 12195-2 LC in direct tension: 5,000 daN Highly stretched polyester fabric with low stretch, abrasion and abrasion resistant Galvanized pressure ratchet with hand lever lock and two gears, can be ordered with other ratchets With triangle carabiner with additional delta bracket Webbing doubled, fixed on one side Width: 50mm, Length: 4.0m
Meets the requirements of the current DIN EN 12195-2 LC in direct tension: 5,000 daN Highly stretched polyester fabric with low stretch, abrasion and abrasion resistant Optionally with pressure or gear pull ratchet with hand lever safety device With delta bracket with eyelet snap hook Width: 75mm, Length: 4.0m
The GWS® lashing strap 100 with pressure ratchet is suitable for securing smaller boxes in the boot or as a ‘mini lashing strap’ in model making. Fulfils the requirements of the current DIN EN 12195-2 standard - with mini pressure ratchet - LC in direct tension: 50 daN- STF: 5 daN - SHF: 25 daN- 2-part with profile hook- webbing colour: black - webbing width: 18 mm - webbing length: 3 m - webbing (material): PES - Ratchet (material): Metal
Meets the requirements of the current DIN EN 12195-2 LC in direct tension: 1,000 daN, 35 mm webbing width STF: 240 daN Highly stretched polyester fabric, abrasion and abrasion resistant Galvanized pull ratchet, galvanized hooks Fixed end: 0.40 m, loose end: 5.60 m
Fulfils the requirements of the current DIN EN 12195-2 - 5 m one-piece with pressure ratchet, black - LC in direct tension: 1,000 daN, 35 mm webbing width - STF: 220 daN - Highly stretched polyester fabric, abrasion and abrasion resistant - Webbing width 35 mm
Meets the requirements of the current DIN EN 12195-2 LC in direct tension: 10,000 daN Highly stretched polyester fabric with low stretch, abrasion and abrasion resistant Optionally with pressure or gear pull ratchet with hand lever safety device With triangle carabiner with additional delta bracket Webbing doubled, fixed on one side Width: 75mm, Length: 4.0
Meets the requirements of the current DIN EN 12195-2 LC in direct tension: 2,500 daN, 50 mm webbing width STF: 500 daN long-lever ratchet Easy to use thanks to the long lever Hard-wearing and permanently robust Easy relaxation - safe construction 2 parts, with profile hook, fixed end: 0.40 mOther lengths on requestpackaging units:8 pieces in a carton80 pieces in a large carton
Meets the requirements of the current DIN EN 12195-2 2 pcs. with profile hook, 8 m LC in direct tension: 2,500 daN, 50 mm webbing width STF: 600 daN multi long-lever ratchet with 4 gears Long clamping lever (350 mm) and optimal transmission (20 teeth), i.e. easy operation - high pre-tensioning forces of up to 1000 daN can be achieved Hard-wearing and permanently robust Easy relaxation - safe construction Fixed end: 0.50 m, loose end: 7.5 mother lengths on request
Meets the requirements of the current DIN EN 12195-2 LC in direct tension: 2,500 daN, 50 mm webbing width STF: 350 daN, Galvanized pressure ratchet with hand lever lock and two gear wheels Wear and abrasion resistant webbing Galvanized hooks Fixed end: 0.50 m, loose end: 7.50 m, 8 m in totalOther lengths on requestpackaging units:10 pieces in a carton100 pieces in a large carton
Meets the requirements of the current DIN EN 12195-2 LC in direct tension: 350 daN, 25 mm webbing width STF: 133 daN 2 pcs. with profile hook Highly stretched polyester fabric, abrasion and abrasion resistant Galvanized pressure ratchet Galvanized hooks Fixed end: 0.30 m, loose end: 3.70 m, 4 m in total
Fulfils the requirements of the current DIN EN 12195-2 - 2-piece with profile hook, 2 m, fixed end 0.2 m - LC in the strapping: 800 daN - LC in direct tension: 400 daN - STF: 100 daN - Elongation max. 5% - Strap width: 25 mm
Fulfils the requirements of the current DIN EN 12195-2 - LC in direct tension: 1,000 daN - STF pre-tensioning force 150 daN - 50 mm webbing width - Fixed end: 0.50 m, loose end: 3.50 m - Elongation < 5 %
Meets the requirements of the current DIN EN 12195-2 50mm webbing with cam buckle LC 500 daN in direct tension two-piece with end fittings for keyhole lashing rails Fixed end: 1.5 m, loose end: 2.5 m
Meets the requirements of the current DIN EN 12195-2 LC in direct tension: 300 daN 25mm webbing width 3-piece, loose end and two fixed ends with clamp locks and profile hooks Highly stretched polyester fabric, abrasion and abrasion resistant Length: 5.4m
Meets the requirements of the current DIN EN 12195-2 50mm webbing with cam buckle LC 750 daN in direct train STF 210 daN two-piece for keyhole lashing rails Fixed end: 0.5 m, loose end: 4.5 m
Meets the requirements of the current DIN EN 12195-2Ratchet lashing strap for securing containers (depositables) with oval suspension link and triangle with safety load hook. Length: 2.50m. LC 2,500 daN in direct tension 50mm bandwidth Triangle with safety load hook Dimensions of the oval eyelet: 110 x 60 mm, material thickness: 16 mm
Meets the requirements of the current DIN EN 12195-2Ratchet lashing strap for securing skips/containers with oval suspension link and triangle with safety load hook. Length: 2.50m. LC 4,000 daN in direct tension 50mm bandwidth Triangle with safety load hook Dimensions oval eyelet: 135 x 75 mm Material thickness: 18 mm
We have developed the GWS® tie-down strap (k2) as a solution to the friction loss (k value) that always occurs at the edges when lashing down cargo. By lashing down a load on both sides instead of just one, the loss of friction is compensated. LC in direct tension: 1,500 daN STF: 350-550 daN Highly stretched polyester fabric with low elongation 2 galvanized long-lever ratchets with hand lever safety device Galvanized profile hooks Width: 50mm, Length: 8.3m / 10.3m Fixed ends: 0.4 m, loose ends: 7.5 m / 9.5 m With quick view labelAll parts of the strap are also available separately!
Meets the requirements of the current DIN EN 12195-2 LC in direct tension: 1,500 daN, 50 mm webbing width STF: 720 daN Highly stretched polyester fabric, abrasion and abrasion resistant with low stretch Galvanized long-lever ratchet with hand-lever safety device and four gears Galvanized hooks Fixed end: 0.5 m, loose end: 7.5 mOther lengths on request