-
Cargo Secure equipment
- Special load securing products
- Load securing cardboard
- Lashing straps
- Anti-slip mats and anti-slip underlays
- Load securing material sets for craftsmen
- Ladungssicherung von IBC
- Lashing chains
- Load securing cargo nets
- Blocking devices
- Diagonal lashing equipment
- Tension force measuring devices
- Protractors
- Cargo securing accessories
- Cargo Secure equipment in containers
- Training material
- Lifting equipment
- ADR equipment
- Merchandise articles
- To the homepage

Made of rubber granulateCan be used multiple times, durable, strongPollution TolerantEasy to stow awayOnly 3mm thickMade in Germanyimproves the coefficient of friction up to µ = 0.6

Compliance with the specifications of VDI 2700 sheet 15 is observed in the production of these non-slip mats. Grid anti-slip mat flexible tear resistant Only 3.3mm thick Made in GermanyAre you interested in other dimensions?Not sure which mats you need?Give us a call! We would be happy to advise you!
Compliance with the specifications of VDI 2700 sheet 15 is observed in the production of these non-slip mats. Fully flexible and highly tear-resistant Can be used again and again Highest coefficient of sliding friction Easy to store and clean 4.5mm thick Made in GermanyAre you interested in other dimensions?Not sure which mats you need?Give us a call! We would be happy to advise you!

Compliance with the specifications of VDI 2700 sheet 15 is observed in the production of these non-slip mats. Fully flexible and highly tear-resistant Can be used again and again Highest coefficient of sliding friction Easy to store and clean 4.5mm thick Made in GermanyAre you interested in other dimensions?Not sure which mats you need?Give us a call! We would be happy to advise you!

Pulled loosely onto the webbing, protective hoses enable better distribution of the pretensioning forces and protect the webbing from wear.For 75 mm webbing (round slings or lifting straps), cut in 30 cm Better power distribution Longer durability of the lashing straps Protection of the load against abrasion

Reliably protects the webbing across the entire wear zone. As a roll of 50 m each, for 50 mm thick webbing. No slipping Abrasion-resistant materials Better distribution of the preload force Particularly flexible - can simply be rolled up

Non-staining edge protection pad with anti-slip effect and sliding body for lashing straps with a strap width of up to 50 mm.Maximum safety thanks to the anti-slip effect and absolutely tear-resistant thanks to the integrated fabric.The convincing advantages at a glance: - handy and light, octagonal 15 x 15 cm - Reduction of the friction loss (“k-value”) at the edges of the load reduces the loss and damage of transported goods -Time savings through possible permanent fixation on the tension belt

The heavy-duty pad that becomes edge protectionWhether the heaviest concrete columns, cast steel parts or large machines - sharp-edged and difficult-to-secure loads are secured against slipping or scratching with the GWS® anti-slip edge protection pad for heavy-duty transport and lashing straps are protected. The convincing advantages at a glance: - Very long service life - Easy to clean again and again - Protects lashing straps and minimises transport damage - Reduces friction loss (‘k-value’) at the edges of the load - Handy and lightweight Dimensions:120 mm x 240 mm x 3 mm

The heavy-duty pad that becomes edge protectionWhether the heaviest concrete columns, cast steel parts or large machines - sharp-edged and difficult-to-secure loads are secured against slipping or scratching with the GWS® - anti-slip edge protection pad for heavy-duty transport and lashing straps are protected.The convincing advantages at a glance: -very long useful life -always easy to clean -protects lashing straps and reduces transport damage -Reduction of the friction loss (“k-value”) at the edges of the load - Handy and lightDimensions:-120mm x 240mm x 6mm

Compliance with the specifications of VDI 2700 sheet 15 is observed in the production of these non-slip mats. Improves the coefficient of sliding friction to µ = 0.6 Mats or rolls of rubber granules Maximum load: 250 t/m² = 2.5 N/mm² at 8 mm thickness Tensile strength approx. 0.80 N/mm² based on DIN EN ISO 1798 Elongation at break at least 60% based on DIN EN ISO 1798 Can be used multiple times, durable, strong Pollution Tolerant Easy to stow away Thicknesses: 6mm, 8mm, 10mm Made in GermanyAre you interested in other dimensions?Not sure which mats you need?Give us a call! We would be happy to advise you!

GWS® AT-PAPP is an aid to protect the cargo for your road, rail and sea transport and is very well suited for securing the end of containers.The GWS® AT-PAPP is the newly developed securing aid for the protection and final securing of the load in the container when using TY-GARD 2000® or TY-GARD DS®.When using the TY-GARD® reverse band (headband), this cardboard can also be used very well as impact protection.Distributes the force evenly and protects the load from damageCheaper and easier to handle than e.g. wooden panels or similar.High strength cardboardCan be used multiple times if used correctlyIndividual production—all production dimensions possibleThe GWS® AT-PAPP is fully recyclable and protects the environment.Minimum purchase: 900 piecesSmaller quantities: It is possible to purchase a smaller quantity in connection with other current orders.

The GWS® belt and edge protection is used as a base to protect the lashing strap.Benefits: Handy and easy on the load Longer durability of the lashing straps Better force distribution in the lashing strapAlso available for tape widths of 25, 35 and 75 mm on request

Extremely break-resistant and dimensionally stable thanks to the new design.For the transport of standing, lying or edge-sensitive loads.Suitable for transporting paper rolls.Technical specifications: For webbing width 50 mm High quality technical ABS plastic Extremely break-resistant and dimensionally stable thanks to the new design Improvement of the deflection factor "k" when lashing down to k = 1.8 Belt fixation by side guide Pressure point shifted by raised side parts no edge damage due to cavity inside Dimension 217x187x120mm Weight approx. 318g1 carton = 56 pieces
for strap width 25 mm - Dimension 110 x 70 x 32 mm - Weight: 18 gr.
for strap width 35 mm - Dimension 110 x 70 x 42 mm - Weight: 19 gr.

Extremely break-resistant and dimensionally stable thanks to the new design.For the transport of standing, lying or edge-sensitive loads.Suitable for transporting paper rolls.Technical specifications: For webbing width 50 mm High quality technical ABS plastic Extremely break-resistant and dimensionally stable thanks to the new design Improvement of the deflection factor "k" when lashing down to k = 1.8 Belt fixation by side guide Pressure point shifted by raised side parts no edge damage due to cavity inside Dimension 105x105x90mm Weight approx. 112g1 carton = 200 pieces

This particularly light edge angle protects your load from transport damage and protects your lashing straps. - light and flexible - 135 mm wide, 90 mm leg length - suitable for belts up to 75 mm wide

Protects your transported goods and spares your belts! 190 x 190 mm side lengths 19 mm material thickness (double wall plate) Lengths from 0.8 m - 6.0 m

light, highly flexible and impact resistantBelt fixation by centrally mounted side guide for belts up to 50 mmSuitable for securing palletized paving stones, beverage crates or precast concrete partsavailable in 3 lengthsShackle length: 185 mmAlso available as an extendable version!! (On demand)

Zum bequemen und schnellen Aufrollen von Zurrgurten. So lassen sich Losenden leichter verstauen, nehmen weniger Platz ein und sind schneller wieder einsetzbar.Für Gurtbandbreiten bis 50 mmFür Gurtlängen bis 10 mMaterial: Metall verzinkt
The GWS® head lashing cardboard (GWS® K-PAPP) is a newly developed securing aid for load securing. Instead of using pallets for head lashing when securing loads, the GWS® K-PAPP can be used cost-effectively, which also saves time and weight.The GWS® K-PAPP consists of one piece and is easy to handle. If the lashing angles are observed, the GWS® K-PAPP offers optimal load securing in or against the direction of travel. In this way you save on lashing equipment, because by securing the load in combination, you can secure the load more quickly and easily than just lashing it down, for example. Saving time and weight Can be used in and against the direction of travel If used correctly, multiple uses are possible Fully recyclable and therefore environmentally friendly Optimum load securing if the lashing angles are observedIn conjunction with anti-slip mats between the palletized bagged goods and the loading area, an even better retention force is achieved.Dimensions: 1200 x 3200mmMinimum order quantity: 500 piecesSmaller quantities: It is possible to purchase a smaller quantity in connection with other current orders.

For convenient and quick rolling up of lashing straps. Loose ends can be stowed away more easily, take up less space and can be used again more quickly.For webbing widths up to 50 mmMaterial: steel, black powder-coated

The GWS® LaSi-Papp is a certified aid for load securing of soft packaging.GWS® LaSi-Papp is a special edge protection with which the necessary securing forces can be applied without damaging the load. Preload forces of up to 800 daN can be achieved without any loss of friction When used correctly, it can be used several times Also suitable as edge protection for other loadsIn conjunction with anti-slip mats between the palletized goods and the loading area, an even better retention force is achieved.The GWS® LaSi cardboard is fully recyclable and protects the environment.Dimensions: 300 x 1,500 mmMinimum order quantity: 4,000 piecesSmaller quantities: It is possible to purchase a smaller quantity in connection with other current orders.

The GWS® LaSi-PAPP is a certified aid for load securing of soft packaging.GWS® LaSi-Papp is a special edge protection with which the necessary securing forces can be applied without damaging the load. Preload forces of up to 800 daN can be achieved without any loss of friction When used correctly, it can be used several times Also suitable as edge protection for other loadsIn conjunction with anti-slip mats between the palletized goods and the loading area, an even better retention force is achieved.The GWS® LaSi cardboard is fully recyclable and protects the environment.Dimensions: 300 x 3,000 mmMinimum purchase quantity: 3,200 piecesPer pallet: 400 piecesSmaller quantities: It is possible to purchase a smaller quantity in connection with other current orders.